Start with the damage, not the iron
Iron-on labels for rainwear are a repair tool first and a labeling tool second. The Wheat Strygemærker - Regntøj - light flint letters are described as waterproof, hard-wearing and developed for rainwear, with the stated purpose of covering minor holes and wear so a favorite piece stays in use.
That framing matters. Before you heat up an iron, look at what you are actually dealing with: a small hole, a worn patch, or simply a need to mark whose rain gear is whose. The label can help with the first two, but the supplied product information does not describe a repair method beyond following the instructions on the packaging.
What the Wheat Strygemærker record confirms
- Tilkøb af Strygemærker - Regntøj - light flint letters: Material: 55% recycled polyester (post-consumer) and 45% water-based polyurethane. This tells you what the patch itself is made of, which is useful when you are matching it to a rainwear repair rather than a cotton garment.

Tilkøb af Strygemærker - Regntøj - light flint letters - Tilkøb af Strygemærker - Regntøj - light flint letters: Described as waterproof and hard-wearing, with easy application using an iron. These are the properties that make the label plausible for outdoor gear, but the application detail still comes from the packaging.
- Tilkøb af Strygemærker - Regntøj - light flint letters: Developed for rainwear and suitable for the brand's rainwear, thermal rainwear and rubber flight suits. This is the compatibility statement to check against the garment you want to repair or label.
- Tilkøb af Strygemærker - Regntøj - light flint letters: Available in Onesize. One size is the only variant listed, so plan the placement around the patch size rather than expecting a range of sizes.
A supported sequence for applying the label
The supplied record does not include iron temperature, pressing time, or a backing-paper procedure. Those details belong to the instruction on the back of the packaging, so treat the steps below as the order of decisions, not as a substitute for that leaflet.
- 1. Confirm the garment is in scope: The record names the brand's rainwear, thermal rainwear and rubber flight suits. If your item is outside that list, the supplied information does not confirm suitability.
- 2. Read the packaging instruction before touching the iron: The product text explicitly says to follow the instruction on the back of the packaging. That is where the heat and application settings live.
- 3. Match the patch to the damage: The stated use is covering minor holes and wear. A patch that is much smaller than the worn area will not do the job the product is described for.
- 4. Check the garment's own care label: The supplied evidence does not list care or heat limits for the rainwear itself. If the garment label restricts ironing, that restriction takes precedence over any general expectation about the patch.
- 5. Apply, then inspect: Once applied according to the packaging, check that the patch sits flat and covers the intended area. The record does not specify a curing or waiting period, so do not assume one.
Labeling rain gear versus repairing it
Name labels for kids clothes solve a different problem from a repair patch. If the goal is to get a rain jacket back from school, a small iron-on label with a name does that job. If the goal is to stop a small hole from growing, the same product is being used as a patch, and the placement and size matter more.
The Wheat Strygemærker record supports both uses only to the extent described: waterproof, hard-wearing, easy to apply with an iron, and intended for covering minor holes and wear. It does not describe a name-printing service, custom lettering, or a separate labeling format. The product name includes 'light flint letters', which suggests a lettered design, but the supplied facts do not detail the lettering options.
When these waterproof clothing labels are the right choice
- Good fit: You have a small hole or worn spot on the brand's rainwear, thermal rainwear or rubber flight suit, and you want a patch described as waterproof and hard-wearing.
- Good fit: You want to extend the life of a favorite piece rather than replace it, which is the stated purpose of the product.
- Check first: The garment is not one of the named categories. The record does not confirm suitability outside them.
- Check first: You need a specific iron temperature or pressing time. That information is not in the supplied record and must come from the packaging.
- Not the right tool: The damage is larger than a minor hole or area of wear. The product is described for minor holes and wear, not structural repairs.
Care and repair kids outerwear: what to do after applying
The supplied record does not include washing, drying or ironing instructions for the applied label or the repaired garment. That is a real limitation, not an oversight to fill in with guesswork. Keep the packaging, since it carries the instruction the product text points to, and follow the garment's own care label for the rainwear.
If you are building a small repair kit for kids' outdoor clothing, the Strygemærker earn a place because they are purpose-made for rainwear and described as waterproof. They are not a universal patch, and they are not a substitute for the garment's care instructions.

